Careers
Engineering Confidence Into Every Energization
Join the Team Built for the Needs of Modern Utilities
Looking for Like-Minded Individuals
Today’s utility projects bring together protection systems, power conversion equipment, communications networks, SCADA, software platforms, control logic, and equipment from multiple manufacturers.
A problem in any one of these systems can prevent energization or delay commercial operation.
NEEC provides utilities with a single engineering partner capable of working across these interfaces.
Where Engineering Expertise Meets System Commissioning
Build your career at the intersection of energy storage, power systems, and grid reliability. Join experienced BESS, Protection & Control, and commissioning professionals solving complex challenges and delivering the next generation of energy infrastructure.
-
The BESS (Battery Energy Storage System) Field Engineer plays a key role in the commissioning, maintenance, and troubleshooting of large-scale energy storage systems. This position supports the deployment of advanced renewable energy projects by ensuring that battery systems, power conversion equipment, and protection and control components are safely and efficiently integrated into the grid. The role combines strong electrical engineering knowledge with hands-on field expertise.
Key Responsibilities
- - Perform field installation support, testing, and commissioning of Battery Energy Storage Systems (BESS), including PCS, Aux power load banks, fire suppression systems, thermal management systems, inverters, transformers, control systems, and protection relays.
- - Conduct site inspections, functional testing, and system validation to verify design compliance and operational readiness.
- - Troubleshoot electrical, control, and communication issues within BESS and associated substation or renewable energy infrastructure.
- - Collaborate with design engineers, contractors, and utility representatives to ensure successful integration and grid interconnection .
- - Perform thermal management troubleshooting, repairs, analysis of Liquid Cool and Air-Cool systems.
- - Conduct functional testing and repairs of fire suppression systems. Including control panels, sensors and communications.
- - Support Protection & Control (P&C) setup and verify correct relay logic, SCADA signals, and control sequences.
- - Perform system performance monitoring, preventive maintenance , and root-cause analysis of system failures or alarms.
- - Ensure adherence to industry codes, safety standards (OSHA, NFPA 70E), and company procedures.
- - Prepare detailed commissioning reports, test results, and field documentation for project closeout.
- - Assist in training and mentoring field technicians or junior engineers on BESS operations and safety practices.
Qualifications
- Bachelor’s degree in Electrical Engineering or related field (or equivalent experience) is preferred.
- Minimum 3–5 years of experience in electrical systems, renewable energy, or substation protection and control.
- Familiarity with BESS technology, PCS (Power Conversion Systems), Central Inverters, EMS/SCADA , and grid-tied systems.
- Proficiency in reading and interpreting single-line diagrams, schematics, and protection settings .
- Hands-on experience with electrical testing equipment (multimeters, insulation resistance testing, relay test sets, IR cameras, etc.).
- Strong understanding of AC/DC systems, communication protocols (Modbus, DNP3), and inverter control logic.
- Excellent troubleshooting, reporting, and communication skills.
- Willingness to travel to project sites across multiple states and work in field environments.
Preferred Skills: Experience with utility-scale renewable projects (Battery Energy Storage + Solar+ wind) . Knowledge of commissioning software tools and test equipment such as BMS, Modbus Poll, Power Comms, Power Xpert, Omicron or Doble. Prior work with NEC, IEEE, and NERC reliability standards . OSHA 10/30 and First Aid/CPR certification a plus.
Apply Now
This is a field-based role requiring travel to active construction and commissioning sites. The engineer may work in varying outdoor conditions, including substations, renewable energy plants, and remote utility locations. -
The Battery Energy Storage System (BESS) Technician supports the installation, commissioning, operation, and maintenance of large-scale battery energy storage systems deployed across utility and renewable energy projects. This role involves hands-on electrical and mechanical work in the field to ensure reliable system performance, safety, and compliance with design and regulatory standards.
Key Responsibilities
- - Assist with the installation, wiring, and testing of battery energy storage components, including battery packs/racks, PCS, inverters, fire suppression systems, thermal management systems, transformers, and switchgear.
- - Support commissioning and startup activities under the supervision of a BESS Field Engineer or Commissioning Lead.
- - Perform routine inspections, preventive maintenance, and troubleshooting of BESS systems, control panels, and electrical connections.
- - Verify and document proper system operation, including power, communication, and control signals between BESS, inverter, FSS, and SCADA systems.
- - Monitor alarms, fault codes, and equipment parameters to ensure stable and safe operation.
- - Follow strict lockout/tagout (LOTO) and safety procedures when working with high- voltage equipment.
- - Maintain accurate service logs, test data, and daily activity reports for project documentation.
- - Work collaboratively with engineers, contractors, and utility representatives during field assignments.
- - Identify opportunities to improve installation quality, efficiency, and system reliability.
Qualifications
- Associate degree, technical diploma, or equivalent experience in electrical, electronic, or mechanical systems.
- Minimum 2 years of field experience in power systems, renewable energy, or industrial electrical work preferred.
- Familiarity with BESS technology, PCS, inverters, and energy management systems (EMS/SCADA) preferred.
- Ability to read electrical schematics, wiring diagrams, and single-line drawings.
- Skilled in using electrical testing tools (multimeters, insulation testers, torque wrenches, etc.).
- Strong troubleshooting and problem-solving abilities.
- Willingness to travel to field sites and work in varying weather and construction environments.
Preferred Skills: Experience with utility-scale solar + storage or wind + storage systems. Knowledge of communication protocols (Modbus, DNP3, TCP/IP). OSHA 10/30 certification and familiarity with NFPA 70E safety standards. CPR/First Aid certification a plus.
Apply Now
This is a field-based role requiring travel to active construction and commissioning sites. The engineer may work in varying outdoor conditions, including substations, renewable energy plants, and remote utility locations. -
The Commissioning Engineer – Protection & Control (P&C) is responsible for the testing, verification, and energization of substation protection, control, and automation systems. This role ensures that all equipment and protection schemes function as designed, meet utility and regulatory standards, and operate safely and reliably. The position requires extensive field experience, technical expertise, and collaboration with design, construction, and utility teams during substation and renewable project commissioning.
Key Responsibilities
- - Lead or assist in the commissioning of protection and control systems for high-voltage substations (ranging from 4 kV to 500 kV).
- - Perform functional and acceptance testing of protective relays, control panels, and
- - SCADA/RTU interfaces.
- - Review and verify protection settings, wiring diagrams, logic, and point-to-point checks for all devices and circuits.
- - Execute end-to-end relay testing using advanced test equipment (e.g., Omicron, Doble, Megger).
- - Validate and document breaker operations, tripping logic, alarms, and interlocks .
- - Troubleshoot field issues related to control circuits, communications, and relay logic during energization.
- - Coordinate with engineering, construction, and utility representatives to ensure all commissioning tasks align with project requirements.
- - Develop and maintain test reports, as-built documentation, and commissioning records.
- - Ensure compliance with NERC, IEEE, and utility standards as well as company safety and quality procedures.
- - Mentor and support junior engineers or technicians on P&C systems and testing practices.
Qualifications
- Bachelor's degree in Electrical Engineering or equivalent field experience.
- 3-7 years of direct experience in substation or power system commissioning, with emphasis on P&C systems.
- Proficiency with protective relays (SEL, GE, ABB, Siemens, etc.) and associated software (AcSELerator, Enervista, DIGSI).
- Strong understanding of AC/DC control circuits, CT/PT configurations, logic diagrams, and communication protocols (DNP3, Modbus, IEC 61850) .
- Skilled in the use of test sets such as Omicron CMC, Doble F6150, or similar.
- Excellent documentation and reporting skills.
- Ability to read and interpret schematics, single-line diagrams, and wiring drawings .
- Willingness to travel to field sites nationwide and work in substation environments.
Preferred Skills: Experience in utility or EPC substation projects . Familiarity with relay coordination, RTU/SCADA integration, and IEC 61850 GOOSE testing . Knowledge of battery systems, solar, and renewable integration . OSHA 10/30 certification and NFPA 70E safety training preferred.
Apply Now
This is a field-based position that requires travel to substations and renewable project sites across the U.S. Work may include outdoor environments, energized yards, and construction settings. Adherence to safety procedures and PPE requirements is mandatory. -
The Protection & Control (P&C) Engineer is responsible for the design, development, and implementation of electrical protection and control systems for high-voltage substations and renewable energy projects. This role ensures the reliable and secure operation of transmission and distribution systems by designing protective relay schemes, control logic, and communication interfaces that meet utility and industry standards. The P&C Engineer works closely with project teams, field personnel, and utility clients to deliver high-quality engineering solutions from concept through commissioning.
Key Responsibilities
- - Design and develop protection and control (P&C) systems for substation and renewable projects, including one-line diagrams, three-line diagrams, AC/DC schematics, and wiring diagrams.
- - Prepare relay protection and control logic , control schematics, and interconnection drawings for new and existing substations.
- - Specify and configure protective relays (SEL, GE, ABB, Siemens, etc.) , metering, and communication equipment.
- - Develop and review relay settings and coordination studies using short-circuit and protection coordination software (ETAP, Aspen, CAPE, etc.).
- - Support commissioning and field testing teams by providing technical guidance and reviewing test results.
- - Ensure compliance with NERC, IEEE, IEC, and utility-specific standards for design and protection.
- - Coordinate with civil, structural, and physical electrical teams to integrate protection and control systems into complete substation designs.
- - Prepare as-built documentation, control panel layouts, cable schedules, and bill of materials.
- - Conduct peer reviews and quality checks to ensure the accuracy and reliability of deliverables.
- - Provide technical support to utility clients during design reviews, system upgrades, and fault investigations.
Qualifications
- Bachelor’s degree in Electrical Engineering or related field.
- 3-7 years of experience in protection and control system design, preferably within a utility or EPC environment.
- Strong knowledge of power system protection principles , including overcurrent, differential, distance, and breaker failure schemes.
- Proficiency with relay configuration software (AcSELerator, Enervista, DIGSI, etc.) and drafting/design tools (AutoCAD, MicroStation).
- Understanding of SCADA systems, RTUs, and communication protocols (Modbus, DNP3, IEC 61850).
- Familiarity with industry codes and standards (IEEE, ANSI, NERC, NEC).
- Excellent attention to detail and documentation skills.
- Strong communication and teamwork abilities to coordinate with multi-discipline teams.
Preferred Skills: Experience with utility-scale renewable projects (Solar + Storage, Wind + BESS). Working knowledge of relay coordination software (ETAP, Aspen OneLiner, or CAPE). Familiarity with commissioning and field testing procedures . PE license or EIT certification preferred. OSHA 10/30 or NFPA 70E training a plus.
Apply Now
This role may include both office-based design work and field support at substations or renewable energy sites. Occasional travel is required to support commissioning, troubleshooting, or client meetings. -
The Protection & Control (P&C) Technician is responsible for the installation, wiring, testing, and maintenance of protection, control, and automation systems in high-voltage substations. This role supports commissioning engineers and ensures that all protection schemes and control equipment are installed and operating correctly in accordance with design specifications, utility standards, and safety requirements. The position requires strong hands-on technical skills, attention to detail, and the ability to work safely and effectively in field environments across multiple project sites.
Key Responsibilities
- - Assist in the installation and wiring of protection and control panels, relays, and related substation equipment.
- - Perform functional testing, point-to-point checks, and verification of control circuits, alarms, and interlocks.
- - Support commissioning and energization activities under the supervision of P&C and commissioning engineers.
- - Conduct routine maintenance and troubleshooting of protective relays, breakers, transformers, and SCADA systems.
- - Operate and maintain test equipment such as multimeters, relay test sets (Omicron, Doble, Megger), and insulation testers.
- - Verify relay settings, logic, and tripping schemes against design documentation.
- - Document test results, issues, and resolutions in detailed field and commissioning reports .
- - Follow all NEEC and client safety procedures , including lockout/tagout (LOTO), PPE use, and substation entry requirements.
- - Work collaboratively with engineers, construction teams, and utility representatives to ensure project success.
Qualifications
- Associate degree, technical certification, or equivalent field experience in Electrical Engineering Technology or a related discipline.
- Minimum 2–5 years of experience in P&C field testing, relay maintenance, or substation operations.
- Familiarity with protective relays (SEL, GE, ABB, Siemens) and their associated software tools.
- Ability to read and interpret electrical drawings, wiring diagrams, and schematics .
- Proficiency with electrical and electronic testing tools and basic relay testing procedures.
- Strong understanding of AC/DC control circuits, grounding, and communication systems .
- Excellent attention to detail and ability to work independently in the field.
- Willingness to travel to project sites across the U.S. and work in substation environments.
Preferred Skills: Experience supporting utility or EPC substation projects . Working knowledge of DNP3, Modbus, and IEC 61850 communication protocols . Familiarity with SCADA/RTU systems and data point verification. OSHA 10/30 certification and NFPA 70E electrical safety training preferred. CPR and First Aid certifications are a plus.
Apply Now
This is a field-based position that involves travel to substations and renewable project sites. The role includes work in outdoor environments and around high-voltage electrical equipment. Strict adherence to safety procedures and quality standards is required. -
The Substation Electrician performs electrical installation, maintenance, and repair work on high-voltage substations and related equipment. This role supports utility and renewable energy projects, ensuring safe, efficient, and reliable operation of substations, switchgear, transformers, and protection systems. The position requires strong hands-on electrical skills, strict adherence to safety standards, and the ability to work effectively in field environments.
Key Responsibilities
- - Install, terminate, and test high- and low-voltage wiring, conduit, and control cables in substations.
- - Assemble, wire, and connect switchgear, circuit breakers, transformers, relays, and control panels according to electrical drawings and standards.
- - Assist in commissioning, testing, and troubleshooting of protection and control systems.
- - Perform preventive and corrective maintenance on substation equipment, including cleaning, torqueing, and insulation checks.
- - Support engineers and technicians in verifying control logic, interlocks, and relay functions .
- - Operate and maintain electrical tools, test instruments, and heavy equipment safely.
- - Read and interpret schematics, wiring diagrams, and single-line drawings .
- - Document all work performed and complete daily field reports.
- - Follow all OSHA, NFPA 70E, and company safety regulations , including lockout/tagout (LOTO) procedures.
- - Collaborate with project managers, field engineers, and utility representatives to ensure project success and schedule adherence.
Qualifications
- High school diploma or GED required; completion of an electrical apprenticeship or technical program preferred.
- Minimum 3-5 years of experience as an electrician in utility, industrial, or substation environments.
- Strong understanding of AC/DC systems, grounding, control circuits, and electrical protection devices .
- Ability to use electrical test equipment (multimeters, meggers, phasing sticks, etc.) safely and accurately.
- Experience working around high-voltage (69 kV–500 kV) equipment and systems.
- Excellent attention to detail, troubleshooting ability, and adherence to safety standards.
- Willingness to travel to multiple job sites and work outdoors in varying weather conditions.
Preferred Skills: Experience in substation construction, commissioning, or maintenance . Familiarity with relay testing and P&C systems . Certification or training in OSHA 10/30, NFPA 70E, and First Aid/CPR . Knowledge of NERC, IEEE, and NEC standards . Ability to operate substation equipment such as aerial lifts, cranes, or cable pullers (if certified).
Apply Now
This is a field-based position requiring travel to active substation and renewable project sites across the U.S. Work involves exposure to high-voltage electrical equipment, construction conditions, and outdoor environments. Safety, professionalism, and teamwork are essential at all times. -
The Substation Electrician Lead oversees and performs electrical construction, installation, testing, and maintenance work for high-voltage substations. This role combines advanced technical expertise with leadership responsibilities, ensuring that all substation electrical work is completed safely, efficiently, and in compliance with project specifications and industry standards. The Substation Electrician Lead supervises field crews, coordinates with engineers and project managers, and provides technical direction to ensure high-quality workmanship and safe energization of substation equipment.
Key Responsibilities
- - Lead and supervise substation electricians and technicians during installation, wiring, and testing of electrical equipment.
- - Plan and coordinate daily work activities , ensuring alignment with project schedules, drawings, and safety requirements.
- - Perform and oversee installation, termination, and testing of control cables, switchgear, transformers, relays, and grounding systems.
- - Conduct quality inspections and functional checks of electrical systems to verify compliance with design documents.
- - Collaborate closely with P&C engineers, commissioning teams, and utility representatives during testing and energization phases.
- - Diagnose and resolve electrical or control circuit issues during construction and commissioning.
- - Ensure all work is performed in accordance with OSHA, NFPA 70E, and NEEC safety policies , including proper use of PPE and lockout/tagout (LOTO) procedures.
- - Maintain detailed project documentation , including redlines, field reports, and equipment test results.
- - Train and mentor junior electricians and apprentices on substation safety, installation techniques, and electrical standards.
- - Participate in project planning meetings , providing input on constructability, safety, and scheduling.
Qualifications
- High school diploma or GED required; completion of an electrical apprenticeship or technical training program preferred.
- Minimum 5-8 years of experience in substation electrical installation, maintenance, or commissioning.
- Proven experience leading field crews in utility or EPC substation projects .
- Strong knowledge of high-voltage systems (69 kV–500 kV), AC/DC circuits, relays, switchgear, and transformers .
- Ability to read and interpret schematics, wiring diagrams, and one-line drawings .
- Proficiency with electrical testing tools (multimeters, meggers, phasing sticks, relay test sets, etc.).
- Excellent communication, coordination, and problem-solving skills.
- Strong commitment to workplace safety and quality control.
- Willingness to travel to project sites across multiple states and work outdoors in various conditions.
Preferred Skills: Experience supporting protection & control (P&C) systems or commissioning activities . Familiarity with SCADA and control panel wiring . Certifications in OSHA 10/30, NFPA 70E, First Aid/CPR , and electrical safety training. Understanding of NERC, IEEE, and NEC standards for substation design and operation. Experience with leadership reporting tools , daily logs, or field management systems.
Apply Now
This is a field-based leadership role requiring travel to substation and renewable project sites throughout the United States. The position involves hands-on work around high-voltage electrical equipment and outdoor environments. The Substation Electrician Lead must model safety excellence and ensure all team members follow company and client procedures at all times. -
The Construction Manager oversees the planning, coordination, and execution of substation, transmission, and renewable energy construction projects. This role ensures that all work is completed safely, on time, within budget, and according to design specifications and quality standards. The Construction Manager serves as the primary field leader, coordinating between engineering teams, contractors, vendors, and clients to deliver successful utility and renewable energy infrastructure projects.
Key Responsibilities
- - Lead and manage field construction activities for substation, BESS, and renewable energy projects across multiple locations.
- - Supervise and coordinate construction crews, subcontractors, and field supervisors , ensuring adherence to project schedules and safety requirements.
- - Review and interpret engineering drawings, specifications, and submittals to ensure accurate field implementation.
- - Oversee material deliveries, equipment installation, and site logistics , ensuring efficient resource use and minimal downtime.
- - Conduct daily and weekly site meetings to review progress, address issues, and align with project goals.
- - Collaborate with project managers and engineers to resolve technical and field-related challenges.
- - Monitor and enforce quality control standards , ensuring compliance with NEEC, client, and regulatory requirements.
- - Prepare and maintain construction documentation , including reports, RFIs, redlines, and as-built drawings.
- - Support and enforce OSHA, NFPA 70E, and company safety protocols to maintain a zero-incident work environment.
- - Evaluate subcontractor performance and ensure all field activities align with contractual obligations.
- - Coordinate with utility representatives during inspections, energization, and commissioning phases.
- - Manage budget tracking, scheduling updates, and project closeout documentation .
Qualifications
- Bachelor's degree in Construction Management, Electrical Engineering, or a related field , or equivalent field experience.
- Minimum 7-10 years of experience managing construction projects in the utility, substation, or renewable energy sectors.
- Strong understanding of high-voltage electrical systems, substation construction, and renewable integration (BESS, Solar, Wind) .
- Proven ability to lead field teams, subcontractors, and vendors effectively.
- Excellent knowledge of project scheduling tools (Primavera, MS Project) and construction documentation practices.
- Strong leadership, communication, and problem-solving skills.
- Familiarity with NESC, NEC, OSHA, and IEEE standards .
- Valid driver's license and willingness to travel extensively to job sites nationwide.
Preferred Skills: Prior experience with EPC (Engineering, Procurement, and Construction) or utility- scale renewable projects. Proficiency with AutoCAD, Bluebeam, or Procore for reviewing and managing construction drawings. OSHA 30, NFPA 70E, and First Aid/CPR certifications preferred. Strong organizational skills for managing multiple concurrent projects and field teams. Ability to anticipate project risks and proactively develop mitigation strategies.
Apply Now
This is a field-based leadership position requiring regular travel to active construction sites across the U.S. The role involves outdoor work, high-voltage environments, and coordination with multidisciplinary teams. The Construction Manager ensures that NEEC’s safety, quality, and performance standards are upheld at every stage of construction. -
The Project Manager oversees the execution of engineering and construction projects across NEEC’s core service areas — including substations, protection & control (P&C), and renewable energy systems such as BESS, solar, and wind. This role is responsible for managing project scope, schedule, budget, and client communications from initiation through closeout. The Project Manager ensures that all work meets NEEC’s safety, quality, and performance standards while coordinating the efforts of engineering, field, and administrative teams.
Key Responsibilities
- - Manage the planning, scheduling, and execution of utility and renewable energy projects from start to finish.
- - Serve as the primary point of contact for clients, vendors, and subcontractors to ensure clear communication and alignment on deliverables.
- - Develop and maintain project budgets, cost tracking, and financial forecasts , ensuring adherence to contractual and company requirements.
- - Lead project kickoff, progress, and closeout meetings , both internally and with clients.
- - Coordinate with engineering and field teams to ensure timely delivery of drawings, materials, and construction activities.
- - Review and approve project documentation , including proposals, schedules, change orders, RFIs, and submittals.
- - Oversee procurement processes , including material requests, vendor selection, and logistics coordination.
- - Monitor construction progress and resolve technical or logistical challenges in collaboration with Construction Managers and Field Engineers.
- - Ensure compliance with NEEC's quality assurance and safety programs , as well as
- - OSHA and client-specific requirements.
- - Maintain accurate project records, status reports, and as-built documentation for client handover.
- - Identify and mitigate potential project risks, delays, or scope changes through proactive management.
- - Support company growth initiatives by assisting in proposal development and client relationship management.
Qualifications
- Bachelor's degree in Electrical Engineering, Construction Management, or a related field .
- Minimum 7–10 years of project management experience in the utility, substation, or renewable energy sectors.
- Proven ability to manage multiple complex projects simultaneously with diverse teams.
- Strong understanding of high-voltage substation construction, P&C systems, and renewable integration (BESS, Solar, Wind) .
- Proficiency in Microsoft Project, Primavera, or other scheduling software .
- Familiarity with AutoCAD, Bluebeam, and Procore preferred.
- Strong communication, negotiation, and leadership skills.
- Knowledge of NEC, IEEE, and NESC standards as they apply to electrical projects.
- PMP certification or EIT/PE license is an asset.
- Willingness to travel periodically to field project sites and client meetings.
Preferred Skills: Experience managing EPC (Engineering, Procurement, and Construction) projects for utilities or renewable developers. Ability to interpret and analyze engineering drawings, specifications, and cost reports . Familiarity with budget management, contract administration, and subcontractor coordination . OSHA 30, NFPA 70E, or safety training certification a plus.
Apply Now
This position involves a mix of office-based project management and on-site coordination at project locations across the U.S. Travel may be required for client meetings, site inspections, or project reviews. The Project Manager ensures that NEEC’s operational and technical excellence is maintained throughout all phases of the project lifecycle. -
The Safety Specialist is responsible for implementing and monitoring NEEC’s safety programs across substation, renewable energy, and construction projects. This position ensures compliance with federal, state, and client safety regulations and promotes a culture of safety awareness throughout all field operations. The Safety Specialist works closely with project managers, field supervisors, and crew members to identify risks, provide training, and verify that all work is performed safely and efficiently in accordance with NEEC and OSHA standards.
Key Responsibilities
- - Implement and oversee site-specific safety programs for substation, BESS, and renewable energy projects.
- - Conduct daily site safety inspections , audits, and hazard assessments to ensure compliance with OSHA, NFPA 70E, and company procedures.
- - Lead safety orientations, toolbox talks, and training sessions for employees and subcontractors.
- - Investigate and document incidents, near-misses, and safety violations , and recommend corrective actions.
- - Monitor compliance with Lockout/Tagout (LOTO), fall protection, confined space, and electrical safety procedures .
- - Collaborate with field and construction management to develop Job Safety Analyses (JSAs) and Pre-Task Plans (PTPs) for daily activities.
- - Maintain and track safety documentation, including inspection reports, training records, and corrective action logs.
- - Support root-cause analysis and incident reporting processes, ensuring timely communication and resolution.
- - Serve as a liaison between NEEC, clients, and regulatory agencies on all safety matters.
- - Promote a proactive safety culture by engaging with field teams and reinforcing NEEC’s “zero-incident” commitment.
- - Support corporate audits, insurance reviews, and compliance evaluations as required.
Qualifications
- Associate or Bachelor's degree in Occupational Safety, Environmental Health, or related field , or equivalent field experience.
- Minimum 3-5 years of experience in safety management within utility, substation, or renewable energy construction.
- In-depth knowledge of OSHA 1910/1926, NFPA 70E, and other industry safety standards .
- Demonstrated experience conducting field inspections, audits, and employee safety training.
- Excellent communication, observation, and reporting skills.
- Ability to work independently in field environments and travel to multiple project sites across the U.S.
- Proficient in Microsoft Office, safety reporting tools, and incident management systems .
Preferred Skills: OSHA 30, NFPA 70E, First Aid/CPR , and PEC certifications strongly preferred. CHST (Construction Health and Safety Technician) or CSP (Certified Safety Professional) certification is an asset. Experience with electrical or high-voltage environments , including substations and energy storage systems. Knowledge of DOT, EPA, and state environmental safety regulations . Strong leadership and interpersonal skills to engage field crews and promote accountability.
Apply Now
This is a field-based role with travel to active substation and renewable project sites across the country. The Safety Specialist works outdoors in various weather conditions and must be comfortable around high-voltage equipment, heavy machinery, and construction operations. Strict adherence to PPE and safety protocols is required at all times.
Don’t see your role?
Send us your résumé anyway. We hire BESS, protection and control, substation and safety professionals across the country as projects come online, and we keep strong applications on file.
Commissioning shouldn’t become a guessing game.
We don’t just verify that systems work. We understand why they don’t.